Step | Action | Value(s) | Yes | No | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Was the Hydraulic Brake System Diagnostic Check performed? | -- | ||||||||||||||||
2 | Inspect the tires for incorrect pressure. Refer to Tire Inflation Pressure Specifications in Maintenance and Lubrication. Is the tire pressure incorrect? | -- | ||||||||||||||||
3 | Adjust the tires to the correct pressure. Refer to Tire Inflation Pressure Specifications in Maintenance and Lubrication. Is the repair complete? | -- | -- | |||||||||||||||
4 | Inspect the front suspension for loose components. Are there loose components? | -- | ||||||||||||||||
5 | Tighten the loose components. Refer to Fastener Tightening Specifications in Front Suspension. Is the repair complete? | -- | -- | |||||||||||||||
6 | Inspect the brake linings for the following conditions:
Refer to Brake Pad Inspection in Disc Brakes or Brake Shoe Inspection in Drum Brakes. Do any of the above conditions apply? | -- | ||||||||||||||||
7 | Replace the brake linings. Refer to the appropriate procedure:
Is the repair complete? | -- | -- | |||||||||||||||
8 | Inspect the brake rotor for the following conditions:
Refer to the following procedures:
Do any of the above conditions apply? | -- | ||||||||||||||||
9 |
Is the repair complete? | -- | -- | |||||||||||||||
10 | Inspect the brake assembly for loose, broken or missing components. Are there any loose, broken or missing brake assembly components? | -- | ||||||||||||||||
11 | Tighten or replace loose or missing brake assembly components. Refer to the appropriate procedure:
Is the repair complete? | -- | -- | |||||||||||||||
12 | Inspect the following brake caliper assembly components for corrosion:
Refer to Brake Caliper Inspection in Disc Brakes. Are any of the above components corroded or sticking? | -- | ||||||||||||||||
13 | Replace the corroded components. Refer to the appropriate procedure:
Is the repair complete? | -- | -- | |||||||||||||||
14 | Inspect the park brake for improper adjustment. Refer to Park Brake Cable Service/Adjustment or Parking Brake Shoe Adjustment in Park Brake. Is the park brake adjusted improperly? | -- | ||||||||||||||||
15 | Adjust or replace the park brake cable. Refer to the appropriate procedure:
Is the repair complete? | -- | -- | |||||||||||||||
16 | Inspect the front suspension for incorrect alignment. Refer to Wheel Alignment Specifications in Wheel Alignment. Is the wheel alignment incorrect? | -- | ||||||||||||||||
17 | Correct the front wheel alignment. Refer to the appropriate procedure:
Is the repair complete? | -- | -- | |||||||||||||||
18 | Inspect for contaminated or improper brake fluid. Refer to Brake Fluid and Brake Fluid Handling . Is the brake fluid contaminated or improper? | -- | ||||||||||||||||
19 | Flush the brake system. Refer to Hydraulic Brake System Flushing . Is the repair complete? | -- | -- | |||||||||||||||
20 | Inspect the brake pipes and hoses for the following conditions:
Refer to Hydraulic Brake System Flushing . Is there a restricted brake fluid passage? | -- | ||||||||||||||||
21 |
Is the repair complete? | -- | -- | |||||||||||||||
22 | Verify proper brake system operation. Does the brake system operate properly? | -- | System OK |
