Removal Procedure
- Remove the fuel rail assembly. Refer to
Fuel Injection Fuel Rail Assembly Replacement
.
- Remove the retaining clip (1) for the fuel injector (3).
- Remove the fuel injector assembly (5) from the fuel rail.
- Remove and discard the old O-rings (2) and (5). DO NOT
reuse, use NEW ONLY.
Installation Procedure
- Install the NEW O-rings (2) and (4)
on the fuel injector (3).
- Apply a small amount of clean motor oil on the O-rings (2) and (4).
- Position the fuel injector (3) in the fuel rail.
- Install the retaining clip (1) for the fuel injector (3).
- Install the fuel rail assembly. Refer to
Fuel Injection Fuel Rail Assembly Replacement
.