For 1990-2009 cars only
Removal Procedure
- Remove the door trim panel. Refer to Door Trim Panel Replacement .
- Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
- Reposition the window half way down to access the window clamp bolts.
- Remove the window clamp bolts.
- Remove the door window through the top opening of the door.
Installation Procedure
- Install the door window, through the top of the door, to the window regulator that is in the full up position.
- Hand tighten the door window clamp bolts.
- With the aid of an assistant standing outside the vehicle, adjust the door window adjuster (1) to fit the door glass to the door opening.
- From inside the vehicle tighten the door window clamp bolts.
- Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
- Install the door trim panel. Refer to Door Trim Panel Replacement .
- Perform minor height and tip-in adjustments as necessary. Refer to Door Window Minor Height Adjustment or to Door Window Tip-In Adjustment .
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the door window regulator clamp bolts to
10 N·m (89 lb in).
