Front Bumper Fascia Molding Replacement Molding Assembly

1. Open the hood.



2. Remove the fasteners from the grille brackets.
3. Use a flat-bladed tool to release the hook and loop from the grille applique molding.



4. Remove the grille applique molding by pulling toward the front of the vehicle.

1. Install the grille applique molding by aligning the retaining tabs on the molding with the grille brackets.



2. Press the molding into place.

Notice: Refer to Fastener Notice in the Preface section.




3. Install the fasteners to the grille bracket.
4. Tighten the fasteners.

Tighten
Tighten the fasteners to 2.5 N·m (22 lb in).

5. Close the hood.

Front Bumper Fascia Molding Replacement Bow Tie

1. Open the hood.



2. Remove the grille applique molding. Refer to Front Bumper Fascia Molding Replacement .



3. Remove the emblem fasteners.



4. Remove the emblem from the grille applique.

1. Install the emblem to the grille applique.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the emblem fasteners.

Tighten
Tighten the fasteners to 2.5 N·m (22 lb in).




3. Install the grille applique molding. Refer to Front Bumper Fascia Molding Replacement .
4. Close the hood.