GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 SSR 🢒 Body 🢒 Interior Trim 🢒 Folding Top Front Panel Adjustment

Important: Before performing the panel adjustment procedures, refer to Folding Top Clearance Gap Specifications .

Important: 

   • Before making adjustments to the up/down position of the folding top panel determine which panel needs the adjustment and for what reason.
   • When the folding top is closed and latched, if the rear panel is too high or too low relative to the folding top front panel, adjust the position of the rear panel by loosening the fasteners attaching the rear panel to the side rail assembly.

Up/Down Adjustment Procedure
  1. Cycle the folding top open.
  2. Place a protective covering over the interior of the vehicle and quarter panels.
  3. Remove the front headliner. Refer to Roof Retractable Front Headlining Trim Panel Replacement in Interior Trim.

    4. Object Number: 1287566 Size: SH
  4. Mark the fasteners to the side rail for a starting reference point.
  5. Cycle the folding top closed.
  6. Loosen the folding top rear panel fasteners.

    7. Notice: Refer to Fastener Notice in the Preface section.

  7. Adjust the panel as necessary.

    8. Tighten
    Tighten the fasteners to 25 N·m (18 lb ft).

  8. Verify that the folding top rear panel is aligned properly.
  9. Repeat the adjustment procedure as necessary.
  10. Cycle the folding top open.
  11. Install the front headliner. Refer to Roof Retractable Front Headlining Trim Panel Replacement in Interior Trim.
  12. Remove the protective covering.
  13. Inspect the folding top for proper operation. Refer to Power Folding Top Description and Operation .