GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 SSR 🢒 Body 🢒 Interior Trim 🢒 Front Floor Console Compartment Door Lock Cylinder Replacement

Removal Procedure
  1. Remove the console upper trim plate. Refer to Front Floor Upper Console Trim Plate Replacement .

    2. Object Number: 1335667 Size: SH
  2. With the key, move the lock cylinder to the LOCKED position (1).
  3. Remove the key from the lock cylinder.

    4. Object Number: 1335265 Size: SH
  4. Remove the screw (1) retaining the lock cylinder assembly to the upper console.
  5. Remove the lock cylinder assembly from the upper console.

Installation Procedure

    Object Number: 1335667 Size: SH
  1. Move the lock cylinder to the UNLOCK position (1).
  2. Position the lock cylinder assembly to the upper console.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 1335265 Size: SH
  3. Install the screw (1) retaining the lock cylinder assembly to the upper console.

    4. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).


    Object Number: 1335667 Size: SH
  4. With the key, move the lock cylinder to the LOCKED position (1).
  5. Install the console upper trim plate. Refer to Front Floor Upper Console Trim Plate Replacement .