Removal Procedure
- Remove the HVAC module assembly. Refer to
HVAC Module Assembly Replacement
.
- Remove the 3 actuator screws (1).
- Remove the electrical connector (3) from the recirculation actuator (2).
- Remove the recirculation actuator (2).
Installation Procedure
- Connect the electrical connector (3) to the recirculation actuator (2).
- Install the recirculation actuator (2).
Notice: Refer to Fastener Notice in the Preface section.
- Install the 3 screws (1) to the recirculation actuator (2).
Tighten
Tighten the screws to 1.9 N·m (17 lb in).
- Install the HVAC module assembly. Refer to
HVAC Module Assembly Replacement
.