GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Spark 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Lever Replacement

Removal Procedure

    Object Number: 1224827 Size: SH
  1. Remove the parking brake lever cover. Refer to Park Brake Lever Assembly Replacement .
  2. Remove the parking brake cable cover. Refer to Park Brake Cable Trim Panel Replacement in Interior Trim.
  3. Disconnect the brake warning lamp switch (1).

    4. Important: The brake warning lamp switch screw should be removed with the lever fixed.

  4. Remove the brake warning switch lamp screw (2).

    5. Object Number: 1224829 Size: SH
  5. Remove the park brake lever bolts (2) and nut (1).

    6. Object Number: 1224830 Size: SH
  6. Remove the park brake lever cotter pin (1) and remove the pin (2).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1224831 Size: SH
  1. Install the parking brake lever with the cotter pin and pin.
  2. Install the parking brake lever nut (1) and bolts (2).

    3. Tighten

    • Tighten the parking brake nut to 10 N·m (89 lb in).
    • Tighten the parking brake bolts to 10 N·m (89 lb in).
  3. Connect the brake warning lamp switch.
  4. Install the brake warning lamp switch screw.
  5. Install the parking brake cable cover. Refer to Park Brake Cable Trim Panel Replacement in Interior Trim.
  6. Install the parking brake lever cover. Refer to Park Brake Lever Assembly Replacement .