GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Spark 🢒 Steering 🢒 Power Steering System 🢒 Power Steering Pump Pulley Replacement

Tools Required

CH 46486 (DW310-020) Power Steering Pulley Remove Holder

Removal Procedure

    Object Number: 1225413 Size: SH
  1. Remove the front passenger side headlamp. Refer to Headlamp Replacement in Lighting Systems.
  2. Remove the pump drive belt. Refer to Power Steering Pump Belt Replacement .
  3. Hold the pulley with the CH 46486 .
  4. Remove the pump drive pulley nut (2).
  5. Remove the washer, if equipped.
  6. Remove the steering pump pulley.

Installation Procedure

    Object Number: 1225418 Size: SH
  1. Install the pump drive pulley.
  2. Hold the pulley with the CH 46486 .
  3. Install the washer, if equipped.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the steering pump pulley nut (2).

    5. Tighten
    Tighten the steering pump pulley nut to 55-69 N·m (41-51 lb ft).

  5. Install the pump drive belt. Refer to Power Steering Pump Belt Replacement .
  6. Install the front passenger side headlamp. Refer to Headlamp Replacement .