GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Spark 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Rear Object Alarm Module Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.

    2. Object Number: 2100017 Size: SH
  2. Remove the left lower quarter trim panel. Refer to Quarter Lower Rear Trim Panel Replacement.
  3. Disconnect the connector (3) of the object alarm control module (2).
  4. Remove the nut (1) and the rear object alarm control module (2).

Installation Procedure

    Object Number: 2100017 Size: SH
  1. Install the rear object alarm control module (2) with the nut (1).
  2. Connect the electrical connectors (3).
  3. Install the left lower quarter trim panel. Refer to Quarter Lower Rear Trim Panel Replacement.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.