Special Tools

J 1859-A (DW310-010) Steering Wheel Puller

Warning: Refer to Battery Disconnect Warning in the Preface section.

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
2. If the vehicle has the supplemental inflatable restraint system (SIR), remove the steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement.

If the vehicle does not have SIR, remove the steering wheel horn cap.




3. Remove the steering wheel nut (2).
4. Use paint in order to place match marks on the steering wheel and on the steering column shaft (1).




Note: Do not hit the top of the steering column shaft with a hammer during repair work.

5. Remove the steering wheel using the J 1859-A .

1. Align the match marks on the steering wheel and on the steering column shaft (1).
2. Install the steering wheel to the steering column shaft.

Caution: Refer to Fastener Caution in the Preface section.

3. Install the steering wheel nut (2) and tighten to 38 N·m (28 lb ft).
4. If the vehicle has SIR, install the steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement.

If the vehicle does not have SIR, install the steering wheel horn cap.

5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.