GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Tracker - 2WD 🢒 Body and Accessories 🢒 Body Rear End 🢒 Pressure Relief Valve Replacement

Removal Procedure

    Object Number: 487817 Size: SH
  1. Remove the rear bumper fascia (1). Refer to Rear Bumper Fascia Replacement in Bumpers.
  2. Remove the 3 screws and the plastic retainer which secure the pressure relief valve brace.
  3. Remove the pressure relief valve brace from the vehicle.
  4. Gently pry and remove the pressure relief valve (2) from the vehicle.

Installation Procedure

    Object Number: 487817 Size: SH
  1. Install the pressure relief valve (2) to the vehicle. Ensure that the retaining tabs are fully engaged.
  2. Install the pressure relief valve brace to the vehicle. Secure the brace with the 3 screws and the plastic retainer.
  3. Install the rear bumper fascia (1). Refer to Rear Bumper Fascia Replacement in Bumpers.