Step | Action | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|
Schematic Reference: Wiper/Washer Schematics DEFINITION: This table diagnoses the front wipers are always on when the wiper/washer switch is turned to the off position. | |||||||||
1 | Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections? | Go to Step 2 | |||||||
2 | Verify that the front wipers are always on when the wiper/washer switch is turned to the OFF position. Do the front wipers operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 | ||||||
3 |
Did any of the circuits measure a short to voltage? | Go to Step 4 | Go to Step 6 | ||||||
4 |
Does the circuit still have a short to voltage condition? | Go to Step 7 | Go to Step 5 | ||||||
5 | Inspect for poor connections at the harness connector of the wiper/washer switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 8 | ||||||
6 | Inspect for poor connections at the harness connector of the wiper motor. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 9 | ||||||
7 | Repair the short to voltage condition. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 10 | -- | ||||||
8 | Replace the front wiper/washer switch. Refer to Windshield Wiper and Washer Switch Replacement . Did you complete the replacement? | Go to Step 10 | -- | ||||||
9 | Replace the front wiper motor. Refer to Windshield Wiper Motor Replacement . Did you complete the replacement? | Go to Step 10 | -- | ||||||
10 | Operate the system in order to verify the repair. Did you correct the condition? | Go to Step 10 | -- | ||||||
