Schematic Reference: Power Window Schematics

Connector End View Reference: Power Door Systems Connector End Views

Did you review the Power Windows Description and Operation?

Go to Step 2

Go to Symptoms - Doors

1. Turn ON the ignition, with the engine OFF.
2. Make sure the window lockout feature is not enabled.
3. Verify that one or more of the passenger windows is inoperative.

Do the passenger windows operate properly?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

1. Connect a test lamp between the power window master switch up signal circuit of the appropriate passenger window switch and power window master switch down signal circuit of the appropriate passenger window switch.
2. Activate the driver window switch to the UP and DOWN positions.

Does the test lamp illuminate in both positions?

Go to Step 4

Go to Step 7

1. Connect the appropriate passenger window switch.
2. Disconnect the appropriate passenger window motor.
3. Connect a test lamp between the power window motor up circuit of the appropriate passenger window motor and the power window motor down circuit of the appropriate passenger window motor.
4. Activate the appropriate passenger window switch to the UP and DOWN positions.

Does the test lamp illuminate in both positions?

Go to Step 6

Go to Step 5

Test the appropriate power window motor circuits of the appropriate passenger window motor for a short to voltage or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 12

Go to Step 8

Inspect for poor connections at the harness connector of the appropriate passenger window motor. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 12

Go to Step 9

Inspect for poor connections at the harness connector of the driver window switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 12

Go to Step 10

Inspect for poor connections at the harness connector of the appropriate passenger window switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 12

Go to Step 11

Replace the appropriate passenger window motor. Refer to Front Side Door Window Regulator Replacement or Rear Side Door Window Regulator Replacement .

Did you complete the replacement?

Go to Step 12

--

Replace the driver window switch. Refer to Front Side Door Window Switch Replacement .

Did you complete the replacement?

Go to Step 12

--

Replace the appropriate passenger window switch. Refer to Front Side Door Window Switch Replacement .

Did you complete the replacement?

Go to Step 12

--

Operate the system in order to verify the repair.

Did you find and correct the condition?

System OK

Go to Step 2