GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander Ext. 🢒 HVAC 🢒 Heating, Ventilation, and Air Conditioning 🢒 Air Conditioning Evaporator Core Replacement

Removal Procedure

    Object Number: 1547644 Size: SH
  1. Remove the heating, ventilation and air conditioning (HVAC) module assembly. Refer to HVAC Module Assembly Replacement .
  2. Remove the heater outlet duct screws.
  3. Remove the heater outlet duct.

    4. Object Number: 1547693 Size: SH
  4. Remove the heater core cover screws (1).
  5. Remove heater core cover (2).

    6. Object Number: 1547694 Size: SH
  6. Remove the heater core pipe screw (1).
  7. Remove the heater core (2).

    8. Object Number: 825392 Size: SH
  8. Remove the HVAC module to dash panel sound barrier seal.

    9. Object Number: 1547696 Size: SH
  9. Remove the lower HVAC module screws (1).
  10. Separate the upper and lower HVAC module halves.
  11. Remove the evaporator core.

    12. Object Number: 1547692 Size: SH
  12. Remove the evaporator temperature sensor.

    13. Object Number: 791147 Size: SH
  13. Remove the thermal expansion valve (TXV) screws.
  14. Remove the TXV from the evaporator core.
  15. Remove and discard the sealing washers.

Installation Procedure

    Object Number: 791147 Size: SH
  1. If replacing the evaporator core add the specified amount of polyalkylene glycol (PAG) oil directly to the evaporator core. Refer to Refrigerant System Capacities .
  2. Install the new sealing washers onto the evaporator line. Refer to Sealing Washer Replacement .
  3. Install the TXV to the evaporator core.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the TXV mounting screws and tighten to 3.2 N·m (28 lb in) .

    5. Object Number: 1547692 Size: SH
  5. Install the evaporator temperature sensor.

    6. Object Number: 1547696 Size: SH
  6. Install the evaporator core.
  7. Align and install the upper case to the lower case.
  8. Install the lower HVAC module screws (1) and tighten to 1.2 N·m (11 lb in) .

    9. Object Number: 825392 Size: SH
  9. Install the HVAC module to dash panel sound barrier seal.

    10. Object Number: 1547694 Size: SH
  10. Install the heater core (2).
  11. Install the heater core pipe screw (1) and tighten to 1.2 N·m (11 lb in) .

    12. Object Number: 1547693 Size: SH
  12. Install heater core cover (2).
  13. Install the heater core cover screws (1) and tighten to 1.2 N·m (11 lb in) .

    14. Object Number: 1547644 Size: SH
  14. Install the heater outlet duct.
  15. Install the heater outlet duct screws and tighten to 1.2 N·m (11 lb in) .
  16. Install the HVAC module assembly. Refer to HVAC Module Assembly Replacement .