GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Venture 🢒 Body and Accessories 🢒 Bumpers 🢒 Rear Energy Absorber Replacement

Removal Procedure
  1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .

    2. Object Number: 740610 Size: SH
  2. Remove the rear object sensor wiring harness push-in retainers from the rear energy absorber if equipped.

    3. Object Number: 735269 Size: SH
  3. Remove the rear energy absorber from the rear bumper fascia by pushing in on the locking tabs at the center of the rear bumper fascia and pulling out.

Installation Procedure

    Object Number: 735269 Size: SH
  1. Align the rear energy absorber to the rear bumper fascia and push in to lock into place.

    2. Object Number: 740610 Size: SH
  2. Press the rear object sensor wiring harness push-in retainers to the rear energy absorber until fully seated, if equipped.
  3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement