GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the torsion bar. Refer to Torsion Bar Replacement .

  2. Object Number: 1253352  Size: SH
  3. Remove the nuts and the bolts from the lower control arm.

  4. Object Number: 1253355  Size: SH
  5. Remove the torsion bar anchor.

Installation Procedure


    Object Number: 1253355  Size: SH
  1. Install the torsion bar anchor.
  2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1253352  Size: SH
  3. Install the nuts and the bolts to the lower control arm.
  4. Tighten
    Tighten the nuts to 80 N·m (59 lb ft).

  5. Install the torsion bar. Refer to Torsion Bar Replacement .