GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2005 🢒 Envoy XUV 🢒 Restraints 🢒 Seat Belts 🢒 Seat Belt Retractor Replacement - No. 2 Left Rear

Removal Procedure
  1. Remove the rear seat belt upper guide shoulder bolt.
  2. Remove the left rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Left Side in Interior Trim.

    3. Object Number: 830745 Size: SH
  3. Remove the rear seat belt lower anchor nut.
  4. Remove the bolt that retains the seat belt retractor assembly to the body.
  5. Remove the seat belt retractor assembly from the vehicle.

Installation Procedure

    Object Number: 830745 Size: SH
  1. Install the seat belt retractor assembly to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the seat belt retractor assembly to the vehicle.

    3. Tighten
    Tighten the rear seat belt retractor bolts to 70 N·m (52 lb ft).

  3. Install the left rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Left Side in Interior Trim.
  4. Install the rear seat belt lower anchor nut. Ensure that the seat belt webbing is not twisted.

    5. Tighten
    Tighten the rear seat mounting nut to 45 N·m (33 lb ft).

  5. Install the rear seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.

    6. Tighten
    Tighten the bolt to 70 N·m (52 lb ft).