GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 Envoy - 2WD 🢒 Body and Accessories 🢒 Body Front End 🢒 Hood Latch Support Replacement

Removal Procedure
  1. Remove the radiator air intake baffle. Refer to Air Intake Baffle Replacement - Radiator .
  2. Remove the headlamp housing panel. Refer to Headlamp Housing Panel Replacement .
  3. Remove the hood latch. Refer to Hood Primary and Secondary Latch Replacement .

    4. Object Number: 749967 Size: SH
  4. Remove the bolts that retain the hood latch support to the radiator support.
  5. Remove the hood latch support from the vehicle.

Installation Procedure

    Object Number: 749967 Size: SH
  1. Install the hood latch support to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts that retain the hood latch support to the radiator support.

    3. Tighten
    Tighten the bolts to 20 N·m (15 lb ft).

  3. Install the hood latch. Refer to Hood Primary and Secondary Latch Replacement .
  4. Install the headlamp housing panel. Refer to Headlamp Housing Panel Replacement .
  5. Install the radiator air intake baffle. Refer to Air Intake Baffle Replacement - Radiator .