DEFINITION: This Diagnostic procedure should only be used if the power door lock system operates properly and all of the keyless entry functions are inoperative.

Was the Keyless Entry System Check performed?

--

Go to Step 2

Go to Remote Keyless Entry System Check

1. Disconnect the remote control door lock receiver connector.
2. Connect a J 39200 DMM, set on volts, between cavity E and ground.

Is there battery voltage?

--

Go to Step 3

Go to Step 5

Connect a DMM between cavity N and ground.

Is there continuity?

--

Go to Step 4

Go to Step 6

Replace the remote control door lock receiver. Refer to Remote Control Door Lock Receiver Replacement .

Is the repair complete?

--

Go to Remote Keyless Entry System Check

--

Repair open in CKT 540 (ORN) between remote control door lock receiver and I/P fuse block. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Remote Keyless Entry System Check

--

Repair open in CKT 150 (BLK) between remote control door lock receiver and G202. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Remote Keyless Entry System Check

--