DEFINITION: This diagnostic procedure should only be used if the power doors lock with the power door lock switches and are inoperative with a keyless entry transmission.

Did you perform the Remote Keyless Entry System Check?

--

Go to Step 2

Go to Remote Keyless Entry System Check

1. Disconnect the remote control door lock receiver connector.
2. Connect a test lamp between cavity R and ground.
3. Press the LF door lock switch to the lock position.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

Replace the remote control door lock receiver. Refer to Remote Control Door Lock Receiver Replacement .

Is the repair complete?

--

Go to Remote Keyless Entry System Check

--

Repair the open in CKT 195 (LT BLU) between the remote control door lock receiver and S261. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Remote Keyless Entry System Check

--