Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the battery negative cable from the battery negative terminal.Refer to Battery Cable .
2. Disconnect the battery positive cable from the battery positive terminal.
3. Slide the insulator from the battery.

1. Install the insulator to the battery by sliding it on.
2. Connect the battery positive cable to the battery positive terminal.
3. Connect the battery negative cable to the battery negative terminal.