Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle Column Shift

1. Remove the electronic lock module assembly. Refer to Electronic Column Lock Module - Disassemble - Off Vehicle .
2. Remove the turn signal and multifunction switch assembly. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle .
3. Use a screwdriver to pry the automatic transmission shift lock control from the steering column jacket assembly.



4. Remove the 3 flat head 6-lobed socket tapping screws (2).
5. Remove the linear shift assembly (1).



6. Remove the steering column seal (3).
7. Remove the adapter and bearing assembly (2).
8. Remove the steering shaft (1).



9. Remove the 4 TORX® head screws (1) from the steering column support assembly (2).
10. Discard the 4 TORX® head screws (1).
11. Remove the steering column support assembly (2) from the steering column jacket assembly (3).

Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle Floor Shift

1. Remove the electronic lock module assembly. Refer to Electronic Column Lock Module - Disassemble - Off Vehicle .
2. Remove the turn signal and multifunction switch assembly. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle .
3. Remove the steering column seal (3).
4. Remove the adapter and bearing assembly (2).
5. Remove the steering shaft (1).



6. Remove the 4 TORX® head screws (1) from the steering column support assembly (2).
7. Discard the 4 TORX® head screws (1).
8. Remove the steering column support assembly (2) from the steering column jacket assembly (3).