DEFINITION: This diagnostic should only be used when the rear wiper motor runs continuosly with the ignition switch is in ACC or RUN and the switch is in the OFF position.

Did you perform the Rear Wiper/Washer System Check?

--

Go to Step 2

Go to Wiper/Washer System Check

Disconnect the rear window wiper / washer switch connector.

Did the rear wiper turn OFF?

--

Go to Step 3

Go to Step 4

Replace the rear window wiper / washer switch.

Is the repair complete?

--

Go to Wiper/Washer System Check

--

1. Repair short to power in CKT391(GRY between rear window wiper / washer switch and rear window wiper / washer module. Refer to Wiring Repairs in Wiring Systems.
2. If no short was found, replace the rear window wiper / washer module. Refer to Rear Window Wiper Motor Replacement .

Is the repair complete?

--

Go to Wiper/Washer System Check

--