Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 4 | Go to Step 3 |
3 | Repair open in CKT393(WHT) between rear window wiper / washer switch and the I/P fuse block. Is the repair complete? | -- | -- | |
4 |
Does the test lamp light? | -- | Go to Step 6 | Go to Step 5 |
5 | Replace the rear window wiper / washer switch. Is the repair complete? | -- | -- | |
6 |
Does the test lamp light? | -- | Go to Step 8 | Go to Step 7 |
7 | Repair open in CKT392(DK GRN) between rear window washer pump and rear window wiper / washer switch. Is the repair complete? | -- | -- | |
8 | Connect a J 39200 DMM, set on Ohms, between rear window washer pump motor connector cavity B and ground. Is continuity present? | -- | Go to Step 9 | Go to Step 10 |
9 | Replace the rear window washer pump motor. Is the repair complete? | -- | -- | |
10 | Repair open in CKT150(BLK) between rear window washer pump motor and G113. Is th erepair complete? | -- | -- |
