Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable. Refer to Battery Cable in Engine Electrical.
2. Remove the fan relay from the underhood fuse/relay center.

1. Install the fan relay to the underhood fuse/relay center.
2. Connect the negative battery cable. Refer to Battery Cable in Engine Electrical.