GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Was the Wiper/Washer System Check performed?

--

Go to Step 2

Go to Wiper/Washer System Check

2

  1. Turn the ignition OFF.
  2. Disconnect the windshield wiper motor connector.
  3. Turn the ignition ON.
  4. Set the wiper/washer switch to HI.
  5. Connect a test light from wiper motor connector terminal C to ground.

Is the test light on?

--

Go to Step 3

Go to Step 4

3

Replace the windshield wiper motor. Refer to Windshield Wiper Motor Replacement .

Is the action complete?

--

Go to Wiper/Washer System Check

--

4

Connect a test light (backprobe) from terminal E3 at wiper/washer switch connector C201C to ground.

Is the test light on?

--

Go to Step 5

Go to Step 6

5

Repair the open in CKT 92 between the switch and the motor.

Is the repair complete?

--

Go to Wiper/Washer System Check

--

6

Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle .

Is the replacement complete?

--

Go to Wiper/Washer System Check

--