Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | ||
2 |
Is the test light on? | -- | ||
3 | Repair the short to voltage in CKT 112. If no short circuit is found, replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Is the repair or replacement complete? | -- | -- | |
4 | Connect a test light from wiper motor connector terminal D to ground. Is the test light on? | -- | ||
5 | Repair the short to voltage in CKT 113. If no short circuit is found, replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Is the repair or replacement complete? | -- | -- | |
6 | Connect a test lamp from wiper motor connector terminal C to ground. Is the test light on? | -- | ||
7 | Repair the short to voltage in CKT 92. If no short is found, replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Is the repair or replacement complete? | -- | -- | |
8 | Replace the windshield wiper motor. Refer to Windshield Wiper Motor Replacement . Is the replacement complete? | -- | -- |
