Tools Required

1. Remove the compressor from the vehicle. Refer to Air Conditioning Compressor Replacement .
2. Install the compressor onto the J 41790-A .



3. Install the J 33023-A onto the front head of the compressor.
4. Remove the compressor clutch plate and hub assembly. Refer to Compressor Clutch Plate and Hub Assembly .
5. Remove the compressor rotor and bearing assembly. Refer to Clutch Rotor and/or Bearing .



6. Mark the clutch coil terminal location (2) on the compressor front head.
7. Install the J 33025 onto the J 8433-1 .
8. Install the J 8433-1 onto the compressor clutch coil (1) and tighten the puller leg bolts.
9. Tighten the center forcing screw J 8433-3 of the compressor pulley puller J 8433-1 against the puller pilot in order to remove the compressor clutch coil from the compressor.

Tools Required

1. Place the clutch coil assembly (1) on the front head with the clutch coil terminal at the positioned at the mark made during disassembly.
2. Place the J 33024 over the internal opening of the clutch coil housing and align installer with the compressor front head.
3. Install the J 8433-3 into the J 8433-1 and center the screw in the countersunk center hole of the J 33024 .
4. Install the 4 inch through bolts and the washers from the J 42136 tool kit into the J 33025 and attach the bolts and the washers to the compressor mounting bosses.
5. Turn the center forcing screw of the J 8433-3 in order to press the clutch coil onto the front head until the clutch coil is fully seated.

Ensure that the clutch coil and the J 33024 stay in line with each other while pressing the clutch coil onto the compressor.

6. Install the compressor clutch rotor and bearing assembly. Refer to Clutch Rotor and/or Bearing .
7. Install the compressor clutch plate and hub assembly. Refer to Compressor Clutch Plate and Hub Assembly .
8. Remove the compressor from the J 41790-A .
9. Install the compressor into the vehicle. Refer to Air Conditioning Compressor Replacement .