GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

Tools Required

    • J 39200 DMM
    • J 35616-200 Test Light

1

Was the Hydraulic Brake System Diagnostic Check performed?

--

Go to Step 2

Go to Hydraulic Brake Diagnostic System Check .

2

Inspect the disc brake pads and brake shoe linings for the following:excessive wear.

    • Excessive wear
    • Uneven wear
    • Abuse
    • Glazing
    • Contaminated lining material
    • Incorrect lining material

Do any of the above conditions apply?

--

Go to Step 3

Go to Step 4

3

Replace the brake linings. Refer to the appropriate procedure:

    •  Brake Pads Replacement in Disc Brakes
    •  Brake Lining Replacement In Drum Brakes

Is the repair complete?

-

Go to Step 8

--

4

Inspect the brake rotors for the following:heat spotting or scoring.

    • Hot spots
    • Scored rotor surface
    • Grooved rotor surface

Refer to Brake Rotor Tolerance in Disc Brakes.

Do any of the above conditions apply?

--

Go to Step 5

Go to Step 6

5

  1. Refinish the rotor. Refer to Brake Rotor Refinishing in Disc Brakes.
  2. If refinishing the brake rotor results in a thickness that is less than the thinnest (Refinishing) thickness, replace the rotor. Refer to Brake Rotor Replacement in Disc Brakes.

Is the repair complete?

-

Go to Step 8

--

6

Inspect brake assembly for loose, broken or missing attachments. Refer to Brake Pad Inspection in Disc Brakes or Brake Shoe Inspection in Drum Brakes.

Are there any loose, broken or missing attachments?

--

Go to Step 7

Go to Hydraulic Brake Diagnostic System Check

7

Tighten or replace the loose, broken or missing brake assembly components.

Is the repair complete?

-

Go to Step 8

--

8

Verify proper brake system operation.

Does the original condition still exist?

--

Begin the diagnosis again. Go to Step 1

Go to Hydraulic Brake Diagnostic System Check