Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Front Wiper/Washer System Check? | -- | Go to Step 2 | |
2 |
Did the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the windshield wiper motor module. Refer to Windshield Wiper Motor Replacement . Is the repair complete? | -- | -- | |
4 | Connect a J 35616-200 between CKT 92 (PPL) at the windshield wiper/washer switch connector C266 cavity E5 and ground. Did the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
5 | Repair the open in CKT 92 (PPL) between the windshield wiper/washer switch connector and the windshield wiper motor module connector. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
6 | Replace the windshield wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Is the repair complete? | -- | -- |
