Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
DEFINITION: This diagnostic should only be used when the rear wiper motor runs continuously with the ignition switch is in ACC or RUN and the switch is in the OFF position. | ||||
1 | Did you perform the Rear Wiper/Washer System Check? | -- | Go to Step 2 | |
2 | Disconnect the rear window wiper/washer switch connector. Did the rear wiper turn OFF? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the rear window wiper/washer switch. Is the repair complete? | -- | -- | |
4 |
Is the repair complete? | -- | -- |