GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

Tools Required

J 34940 Rivet Gun

  1. Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .

  3. Object Number: 277820  Size: SH
  4. Remove the inside door handle assembly completing the following steps:
  5. • Drill out the rivet heads.
    • Slide forward the door handle.

    Object Number: 277822  Size: SH
  6. Disconnect the inside handle control rod from the handle and lock lever assembly.
  7. Disconnect the inside lock control rod from the handle and lock lever assembly.

Installation Procedure


    Object Number: 277822  Size: SH
  1. Connect the inside handle control rod to the handle and lock lever assembly.
  2. Connect the inside lock control rod to the handle and lock lever assembly.

  3. Object Number: 277820  Size: SH
  4. Install the inside door handle by completing the following steps:
  5. • Insert the handle assembly into the slot and slide the assembly to the rear.
    • Using the J 34940 , install the handle rivets.
  6. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  7. Install the trim panel. Refer to Rear Side Door Trim Panel Replacement .