Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer Rear System Check performed? | -- | Go to Step 2 | |
2 | Does the rear washer pump operate? | -- | Go to Step 3 | Go to Rear Washer Inoperative |
3 | Check for an open RR W/W fuse in the Underhood Fuse Block. Was an open fuse found? | -- | Go to Step 4 | Go to Step 5 |
4 | Replace the open fuse. Is the replacement complete? | -- | -- | |
5 |
Is the test light on? | -- | Go to Step 7 | Go to Step 6 |
6 | Repair the open in CKT 1240. Is the repair complete? | -- | -- | |
7 |
Is the test light on? | -- | Go to Step 8 | Go to Step 11 |
8 | Connect a test light from the rear wiper motor harness, terminal C to terminal A. Is the test light on? | -- | Go to Step 10 | Go to Step 9 |
9 | Repair the open in CKT 1350. Is the repair complete? | -- | -- | |
10 | Replace the rear wiper motor. Refer to Rear Window Wiper Motor Replacement Is the replacement complete? | -- | -- | |
11 |
Is the test light on? | -- | Go to Step 12 | Go to Step 15 |
12 |
Is there continuity? | -- | Go to Step 13 | Go to Step 14 |
13 | Repair the open in CKT 393. Is the repair complete? | -- | -- | |
14 | Replace the rear window wiper cutout switch. Is the replacement complete? | -- | -- | |
15 | Backprobe from the rear wiper/washer switch connector, terminal C, to ground with a test light. Is the test light on? | -- | Go to Step 16 | Go to Step 17 |
16 | Repair the open in CKT 391. Is the repair complete? | -- | -- | |
17 | Replace the rear wiper/washer switch. Is the replacement complete? | -- | -- |
