Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Cruise Control Module System Check? | -- | Go to Step 2 | |
2 |
Does the lamp remain lit? | -- | Go to Step 4 | Go to Step 3 |
3 |
Does the test lamp light? | -- | Go to Step 9 | Go to Step 7 |
4 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
5 | Locate and repair the short to the voltage between the stoplamp switch and the cruise control module. Refer to Wiring Repairs Is the repair complete? | -- | -- | |
6 | Adjust or replace the stoplamp switch. Refer to Stop Lamp Switch Replacement Is the repair complete? | -- | -- | |
7 | Does the CHMSL operate properly? | -- | Go to Step 8 | |
8 | Locate and repair the open circuit or high resistance in CKT 1320 (LT BLU) between the cruise control module connector and underhood fuse block connector C1 terminal F11. Refer to Wiring Repairs Is the repair complete? | -- | -- | |
9 | Inspect the terminals for proper contact. Are the contacts clean? | -- | Go to Step 11 | Go to Step 10 |
10 | Clean the contacts as necessary. Refer to Intermittents and Poor Connections Diagnosis Is the action complete? | -- | -- | |
11 | Replace the cruise control module. Refer to Cruise Control Module Replacement Is the repair complete? | -- | -- |
