Removal Procedure
Caution: Do not attempt to service the regulator motor without releasing the
counterbalance spring tension. The regulator lift arm is under tension from
the counterbalance spring and can cause personal injury if the motor is removed
from the regulator.
- Remove the window regulator. Refer to
Front Side Door Window Regulator Replacement
or
Rear Side Door Window Regulator Replacement
.
- Drill a hole through the
window regulator and the sector gear.
- Install a bolt and a nut
through the hole in order to lock the sector gear in position.
- Drill out the rivets that secure the power window motor to the
window regulator.
- Remove the power window motor from the window regulator.
Installation Procedure
- Install the power window motor to the window regulator.
Important: Remove the nut and the bolt that were used in order to secure the sector
gear in position.
- Install the rivets in order to secure the power window motor to the
window regulator.
- Install the window regulator. Refer to
Front Side Door Window Regulator Replacement
or
Rear Side Door Window Regulator Replacement
.