Test Description
The number(s) below refer to the step number(s) on the diagnostic table.
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
Schematic Reference: Sunroof Schematics DEFINITION: Express open feature is disabled. | ||||
1 | Did you perform A Diagnostic System Check - Power Sunroof? | -- | Go to Step 2 | |
Operate the power sunroof express open feature. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 | |
3 |
Does the voltage measure near the specified value? | B+ | Go to Step 5 | Go to Step 4 |
4 | Inspect for a poor connection in the sunroof limit switch low reference circuit at the sunroof module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 8 |
5 | Test the limit switch low reference circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 6 |
6 | Inspect for a poor connection in the sunroof limit switch low reference circuit at the position encoding system (PES) module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 7 |
7 | Replace the PES module. Refer to Sunroof Replacement . Did you complete the replacement? | -- | Go to Step 9 | -- |
8 | Replace the sunroof module. Refer to Power Sunroof Module Replacement . Did you complete the replacement? | -- | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
