Did you perform the radio/audio system check?

--

Go to Step 2

Go to Radio/Audio System Check

1. Turn the ignition switch off.
2. Disconnect the speaker connector.
3. With a digital multimeter (DMM)J 39200 , measure the resistance of the speaker.

Is the resistance within the specified range?

4-15 ohms

Go to Step 3

Go to Step 6

1. Disconnect the radio or the sub-woofer amplifier supplying the inoperative speaker.
2. With a DMMJ 39200 , measure the resistance at the inoperative speaker connector from cavity A to ground.

Is the resistance infinite?

--

Go to Step 4

Go to Step 7

With a DMMJ 39200 , measure the resistance at the speaker from cavity B to ground.

Is the resistance infinite?

--

Go to Step 5

Go to Step 7

Use a DMMJ 39200 in order to check both speaker feed wires for continuity between the speaker and the radio or sub-woofer amplifier.

Does continuity exist?

--

Go to Step 9

Go to Step 8

Replace the speaker. Refer to Radio Rear Side Door Speaker Replacement , Radio Front Side Door Lower Speaker Replacement , Front Upper Speaker Replacement or Rear Pillar Speaker Replacement .

Is the repair complete?

--

Go to Radio/Audio System Check

--

Repair the short to ground in the speaker feed circuit.

Is the repair complete?

--

Go to Radio/Audio System Check

--

Repair the open in the speaker feed circuit.

Is the repair complete?

--

Go to Radio/Audio System Check

--

1. Remove the radio. Refer to Radio Replacement .
2. Send in radio for repair.

Is the repair complete?

--

Go to Radio/Audio System Check

--