Did you perform the Instrument Cluster System Check?

--

Go to Step 2

Go to Instrument Cluster System Check

Use a scan tool Scan Tool in order to read the vehicle control module (VCM) diagnostic trouble codes.

Are there any vehicle speed sensor related trouble codes?

--

Go to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls

Go to Step 3

1. Disconnect the instrument cluster.
2. Disconnect the VCM C4 connector.
3. Disconnect the compass and temperature display module, if equipped.
4. Connect a DMM J 39200 from the instrument cluster connector cavity B14 to ground.

Is there continuity?

--

Go to Step 5

Go to Step 4

Connect a DMM J 39200 between the instrument cluster connector cavity B14 and the VCM connector  C4 cavity 4.

Is there continuity?

--

Go to Step 6

Go to Step 7

Repair the short to ground in CKT 389 (DK GRN) between the following components:

Is the repair complete?

--

Go to Instrument Cluster System Check

--

Replace the instrument cluster . Refer to Instrument Cluster Replacement .

Is the repair complete?

--

Go to Instrument Cluster System Check

--

Repair the open in CKT 389 (DK GRN) between the instrument cluster and the VCM.

Is the repair complete?

--

Go to Instrument Cluster System Check

--