Schematic Reference: Wiper/Washer Schematics

Did you review the Wiper/Washer System Circuit Description and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Wiper/Washer Systems

1. Turn the ignition on.
2. Turn the windshield wiper/washer switch to the off position.

Do the windshield wipers remain in the park position?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Disconnect the steering column connector C201.

Do the windshield wipers stop?

Go to Step 6

Go to Step 4

1. Disconnect the windshield wiper motor connector.
2. Test and repair the windshield wiper switch pulse delay signal circuit for a short to voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 8

Go to Step 5

Replace the windshield wiper motor module. Refer to Windshield Wiper System Module Replacement .

Is the repair complete?

Go to Step 8

--

Test and repair the windshield wiper switch pulse delay signal circuit in the steering column harness for a short to voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 8

Go to Step 7

Replace the windshield wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column-Tilt or Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column-Standard.

Is the repair complete?

Go to Step 8

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3