Air Conditioning Compressor Replacement 4.3, 5.0, and 5.7L Engines

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable. Refer to Battery Cable Replacement in Engine Electrical.
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement 4.3L or Air Cleaner Assembly Replacement 5.0/5.7L in Engine Controls.
3. Recover the refrigerant from the system. Refer to Refrigerant Recovery and Recharging .
4. Disconnect the electrical connector from the compressor.
5. Remove the drive belt. Refer to Drive Belt Replacement 4.3L or Drive Belt Replacement 5.0/ 5.7L in Engine Mechanical.



6. Remove the compressor (3) and the condenser hose assembly. Refer to Compressor Hose Assembly Replacement .
7. Remove the compressor to the mounting bracket bolts.
8. Remove the compressor from the vehicle.
9. Drain and measure the compressor oil.

1. Install the compressor (3) to the vehicle. Refer to Refrigerant Oil Distribution , if replacing the compressor.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the compressor retaining bolts to the mounting bracket.

Tighten
Tighten the bolts to 50 N·m (37 lb ft).

3. Install the compressor and the condenser hose assembly. Refer to Compressor Hose Assembly Replacement .
4. Install the drive belt. Refer to Drive Belt Replacement 4.3L or Drive Belt Replacement 5.0/ 5.7L in Engine Mechanical.
5. Connect the electrical connector to the compressor.
6. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement 4.3L or Air Cleaner Assembly Replacement 5.0/5.7L in Engine Controls.
7. Install the negative battery cable. Refer to Battery Cable Replacement in Engine Electrical.
8. Recharge the refrigerant to the system. Refer to Refrigerant Recovery and Recharging .
9. Inspect the system for leaks.

Air Conditioning Compressor Replacement 7.4L Engine

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Remove the negative battery cable. Refer to Battery Cable Replacement in Engine Electrical.
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls.
3. Recover the refrigerant from the system. Refer to Refrigerant Recovery and Recharging .
4. Disconnect the electrical connector from the compressor.
5. Remove the drive belt. Refer to Drive Belt Replacement in Engine Mechanical.



6. Remove the compressor (3) and the condenser hose assembly. Refer to Compressor Hose Assembly Replacement .
7. Remove the compressor to the mounting bracket bolts.
8. Remove the compressor from the vehicle.
9. Drain and measure the compressor oil.

1. Install the compressor (3) to the vehicle. Refer to Refrigerant Oil Distribution , if replacing the compressor.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the compressor retaining bolts to the mounting bracket.

Tighten
Tighten the bolts to 50 N·m (37 lb ft).

3. Install the compressor and the condenser hose assembly. Refer to Compressor Hose Assembly Replacement .
4. Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical.
5. Connect the electrical connector to the compressor.
6. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls.
7. Connect the negative battery cable. Refer to Battery Cable Replacement in Engine Electrical.
8. Recharge the refrigerant to the system. Refer to Refrigerant Recovery and Recharging .
9. Inspect the system for leaks.

Air Conditioning Compressor Replacement 6.5L Diesel

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable. Refer to Battery Cable Replacement in Engine Electrical.
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls.
3. Recover the refrigerant from the system. Refer to Refrigerant Recovery and Recharging .
4. Disconnect the electrical connector from the compressor.
5. Remove the drive belt. Refer to Drive Belt Replacement in Engine Mechanical.



6. Remove the compressor (1) and the condenser hose assembly. Refer to Compressor Hose Assembly Replacement .
7. Remove the compressor to the mounting bracket bolts.
8. Remove the compressor from the vehicle.
9. Drain and measure the compressor oil.

1. Install the compressor (1) to the vehicle. Refer to Refrigerant Oil Distribution , if replacing the compressor.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the compressor retaining bolts to the mounting bracket.

Tighten
Tighten the bolts to 50 N·m (37 lb ft).

3. Install the compressor and the condenser hose assembly. Refer to Compressor Hose Assembly Replacement .
4. Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical.
5. Connect the electrical connector to the compressor.
6. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls.
7. Install the negative battery cable. Refer to Battery Cable Replacement in Engine Electrical.
8. Recharge the refrigerant to the system. Refer to Refrigerant Recovery and Recharging .
9. Inspect the system for leaks.