Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Remote Keyless Entry (RKE) System description and operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Have the RKE System Transmitters passed the Transmitter Test? | -- | Go to Step 4 | Go to Transmitter Test |
4 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
5 | Connect a J 35616-200 unpowered test lamp between remote control door lock receiver connector cavity F for CKT 540 (ORN) and a known good ground. Does the test lamp light? | -- | Go to Step 7 | Go to Step 8 |
6 | Repair the open in CKT 540 (ORN) between S228 remote control door lock receiver connector cavity E. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 11 | -- |
7 | Connect a J 35616-200 unpowered test lamp between the remote control door lock receiver connector cavity N for CKT 150 (BLK) and B+. Does the test lamp light? | -- | Go to Step 10 | Go to Step 9 |
8 | Repair the open in CKT 540 (ORN) between S228 and remote control door lock receiver connector cavity F. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 11 | -- |
9 | Repair the open in CKT 150 (BLK) between the remote control door lock receiver and grounds G200/G201. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 11 | -- |
10 | Replace the remote control door lock receiver. Refer to Receiver Replacement . Is the repair complete? | -- | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
