Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Remote Keyless Entry System description and operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Does the test lamp light? | -- | Go to Step 4 | Go to Step 5 |
4 |
Does the test lamp light? | -- | Go to Step 6 | Go to Step 7 |
5 |
Is continuity present? | -- | Go to Step 8 | Go to Step 9 |
6 | Replace the left front door lock actuator motor. Refer to Front Side Door Lock Replacement in Doors. Is the repair complete? | -- | Go to Step 12 | -- |
7 | Repair the open in CKT 295 (GRY) between splice S244 and the left front door lock actuator motor. Refer to Connector Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 12 | -- |
8 | Repair the short to ground in CKT 694/294 (TAN) between the remote control door lock receiver connector cavity A and the left front door lock actuator motor connector cavity A. Refer to Connector Repairs . Is the repair complete? | -- | Go to Step 12 | -- |
9 |
Is continuity present? | -- | Go to Step 10 | Go to Step 11 |
10 | Replace the remote control door lock receiver. Refer to Receiver Replacement . Is the repair complete? | -- | Go to Step 12 | -- |
11 | Repair the open in CKT 694/294 (TAN) between the remote control door lock receiver connector cavity A and the left front door lock actuator motor connector cavity A. Refer to Connector Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
