Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Remote Keyless Entry (RKE) System description and operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Have the RKE System Transmitters passed the Transmitter Test? | -- | Go to Step 4 | Go to Transmitter Test |
4 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
5 |
Does the test lamp light? | -- | Go to Step 7 | Go to Step 8 |
6 |
Is continuity present? | -- | Go to Step 9 | Go to Step 10 |
7 | Replace the rear door lock actuator motor. Refer to Rear Door Lock Replacement . Is the repair complete? | -- | Go to Step 13 | -- |
8 | Repair the open in CKT 295 (GRY) between S244 and the rear door lock actuator motor. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
9 | Repair the short to ground in CKT 1576 (BLK)/CKT 294 (TAN) between the remote control door lock receiver and the rear door lock actuator motor. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
10 |
Does the test lamp light? | -- | Go to Step 11 | Go to Step 12 |
11 | Replace the remote control door lock receiver. Refer to Receiver Replacement . Is the repair complete? | -- | Go to Step 13 | -- |
12 | Repair the open in CKT 1576 (BLK)/CKT 294 (TAN) between the remote control door lock receiver and the rear door lock actuator motor. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
13 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
