Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Remote Keyless Entry System description and operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Does the test lamp light? | -- | Go to Step 4 | Go to Step 9 |
4 |
Does continuity exist? | -- | Go to Step 5 | Go to Step 8 |
5 |
Does continuity exist? | -- | Go to Step 6 | Go to Step 7 |
6 |
Does continuity exist? | -- | Go to Step 10 | Go to Step 11 |
7 |
Does the test lamp light? | -- | Go to Step 12 | Go to Step 13 |
8 | Repair the open in the BLK (150) wire between the power door lock control module and Splice S206. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 14 | -- |
9 | Repair the open in the ORN (540) wire between Splice S228 and the power door lock control module. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 14 | -- |
10 | Repair the short to ground in the WHT/BLK (158) wire between the power door lock control module and the side door jamb switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 14 | -- |
11 | Replace the side door jamb switch. Refer to Door Jamb Switch Replacement in Doors. Is the repair complete? | -- | Go to Step 14 | -- |
12 | Replace the power door lock control module. Is the repair complete? | -- | Go to Step 14 | -- |
13 | Repair the open in the LT BLU (195) wire between splice S241 and the power door lock control module pin C. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 14 | -- |
14 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
