Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Remote Keyless Entry System description and operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Is continuity present? | -- | Go to Step 4 | Go to Step 5 |
4 | Replace the power door lock control module. Is the repair complete? | -- | Go to Step 10 | -- |
5 |
Is continuity present? | -- | Go to Step 7 | Go to Step 6 |
6 | Locate and repair the open in the CKT 150 (BLK) wire between the side door jamb switch and ground. Refer to Testing for Continuity and Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 10 | -- |
7 |
Does the test lamp light? | -- | Go to Step 8 | Go to Step 9 |
8 | Replace the side door jamb switch. Refer to Door Jamb Switch Replacement in Doors. Is the repair complete? | -- | Go to Step 10 | -- |
9 | Locate and repair the open in the CKT 158 (WHT/BLK) wire between the power door lock control module and the side door jamb switch. Refer to Testing for Continuity and Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
