Rear Seat Back Cushion Replacement All Except Luxury

1. Remove the seat from the vehicle. Refer to Rear Bench Seat Replacement .
2. Remove the armrest. Refer to Rear Seat Armrest Replacement .



3. Open the access flaps at the lower rear corners of the seatback in order to access the seatback to the frame retaining bolts.
4. Remove the bolts from the seatback frame.
5. Remove the seatback frame from the seatback cushion frame.

1. Install the seatback frame to the seat cushion frame.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the bolts in order to retain the seatback frame to the seat cushion frame.

Tighten
Tighten the bolts to 35 N·m (26 lb ft).

3. Secure the access flaps at the lower rear corners of the seatback.
4. Install the armrest to the seatback. Refer to Rear Seat Armrest Replacement .
5. Install the seat to the vehicle. Refer to Rear Bench Seat Replacement .

Rear Seat Back Cushion Replacement Luxury Y91

1. Remove the rear bench seat from the vehicle. Refer to Rear Bench Seat Replacement .
2. Remove the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement .




Important: Note the position and the length of the bolts removed. This will assist with reassembly.

3. Remove the right and left bolts that retain the seat back frame to the seat back hinges.



4. Remove the seat back frame.

1. Install the seat back frame.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the bolts that retain the seat back frame to the seat back hinges in the locations noted during disassembly.

Tighten
Tighten the bolts that retain the seat back frame to the seat back hinges to 30 N·m (22 lb ft).

3. Install the seat back cover and pad. Refer to Rear Seat Cushion Cover and Pad Replacement .
4. Install the bench seat in the vehicle. Refer to Rear Bench Seat Replacement .