For 1990-2009 cars only
Removal Procedure
- Remove the screws (4) that retain the side front door assist handle (3) to the door.
- Remove the inside handle bezel. Refer to Door Inside Handle Bezel Replacement .
- Remove the side front door trim plate. Refer to Door Trim Plate Replacement .
- Gently pull out the trim panel at the top of the window opening. Using a long, narrow screwdriver, pry the retaining clips apart in order to disengage the clips.
- Lift the side front door trim panel (1) up.
- Remove the side front door trim panel (1) from the door.
- Remove the side front door trim panel (1) from the vehicle.
- Inspect the side front door trim panel (1) for broken or missing retaining clips (2). Replace any retaining clips as needed.
Installation Procedure
- Align the retaining tabs (2) on the side front door trim panel (1) with the slots on the door. Lower the side front door trim panel (1) into place.
- Press on the top of the side front door trim panel (1) in order to engage the retaining clips (2).
- Install the side front door trim plate. Refer to Door Trim Plate Replacement .
- Install the inside handle bezel. Refer to Door Inside Handle Bezel Replacement .
- Install the side front door assist handle (3) to the door.
- Install the screws (4) in order to retain the side front door assist handle (3) to the door.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the screws that retain the front door assist handle
to 1.9 N·m (17 lb in)
