GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 Savana 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Lower Roller Bracket Replacement

Removal Procedure
  1. Remove the side door stepwell mat. Refer to Front Side Door Step Mat Replacement in Interior Trim.
  2. Remove the sliding side door check assembly. Refer to Sliding Door Check Replacement .
  3. Remove the sliding side door upper roller bracket cover. Refer to Rear Side Door Upper Roller Bracket Garnish Molding Replacement .

    4. Object Number: 334048 Size: SH
  4. Remove the bolts that retain the sliding side door lower roller bracket to the door.
  5. Remove the sliding side door lower roller bracket from the track.
  6. Remove the sliding side door lower roller bracket from the vehicle.

Installation Procedure

    Object Number: 334048 Size: SH
  1. Install the sliding door lower roller bracket to the vehicle.
  2. Install the sliding door lower roller bracket to the track.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts that retain the sliding side door lower roller bracket to the door.

    4. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  4. Install the sliding side door check assembly. Refer to Sliding Door Check Replacement .
  5. Install the side door stepwell mat. Refer to Front Side Door Step Mat Replacement in Interior Trim.