Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 |
Did the washer operate? | -- | Go to Step 3 | |
3 |
Did the test lamp light? | -- | Go to Step 4 | Go to Step 7 |
4 | Inspect the washer pump connector for poor connections. Did you find a poor connection? | -- | Go to Step 5 | Go to Step 6 |
5 | Repair the poor connection. Refer to Connector Repairs . Is the repair complete? | -- | -- | |
6 | Replace the washer pump. Refer to Washer Pump/Reservoir Replacement . Is the replacement complete? | -- | -- | |
7 |
Did the test lamp light? | -- | Go to Step 8 | -- |
8 | Repair the open in CKT 350. Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
9 |
Did the test lamp light? | -- | Go to Step 10 | Go to Step 11 |
10 | Repair the open in CKT 228. Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
11 | Inspect wiper/washer switch connector C211, terminal E9, for a poor connection. Did you find a poor connection? | -- | Go to Step 5 | Go to Step 12 |
12 | Replace the wiper switch. Refer to Multifunction, Turn Signal and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column. Is the replacement complete? | -- | -- |
